SMW 437328 LNB PLL لنطاق X‑Band

SMW 437328 LNB PLL لنطاق X‑Band

  • Very Low Noise Figure
  • Excellent Input VSWR
  • High P1dB and IP3
  • Low Phase noise meets DVB-S2X profile.
  • Wide operating temperature range
  • Internal filtering
التصنيفات: , , الوسوم: , , , ,

Satcom 6.30 PLL LNB

 

The professional X-Band PLL LNB is equipped with Low Phase Noise, meeting the requirements for DVB-S2X Professional services. This LNB is designed with a very low input VSWR, eliminating the need for an external isolator. The X-Band PLL LNB model 6.30 covers the frequency range from 7.25 to 7.75 GHz, offering a fixed gain of 60 dB typical (minimum 55 dB). The internal filtering ensures good isolation from interfering signals.

 

 

MODEL/LO 6.30

  • Input Frequency (GHz): 7.25 – 7.75 GHz
  • Input Waveguide: WR112 / R 84. Flange PBR 84
  • Pressurizable: 0.1 bar max. (option)
  • DC Input: +12 to +24 V supplied through the output connector
  • Current Drain:
    • 190 mA @ +13 V
    • 160 mA @ +15 V
    • 140 mA @ +18 V
    • 110 mA @ +24 V
  • Input VSWR: 1.5:1 max.

 

INTERNAL LO ref.

  • LO Reference: Internal or External 10 MHz ref. Note! Different models
    • External LO ref.: Sine Wave, Level -10 to +10 dBm. Supplied through the output connector. (with no ext 10 MHz ref. signal present LO shifts -20 ppm)
    • Internal LO ref.: ±0.5 ppm -20 to +70°C (±1 ppm -40 to +80ºC), ±1 ppm -20 to +70°C (±1.5 ppm -40 to +80ºC)
  • LO Leakage: -60 dBm max. @ waveguide input
  • Gain: 60 dB typ. (55dB min.)
  • Flatness: ±0.4 dB within 30 MHz, ±2 dB max. over the band
  • Noise Figure: 0.69 dB / 50 K max., 0.6 dB / 43 K typ.
  • Phase Noise:
    • -35 dBc @ 10 Hz
    • -65 dBc @ 100 Hz
    • -85 dBc @ 1 kHz
    • -90 dBc @ 10 kHz
    • -100 dBc @ 100 kHz
    • -128 dBc @ >1 MHz typ.
  • Filter Attenuation: 15 dB @ 7.90 GHz, 30 dB @ 8.00 GHz, 40 dB @ 8.10 GHz, 50 dB @ 8.20 GHz, >60 dB @ 8.30-8.40 GHz
  • Image Rejection: 60 dB min.

OUTPUT

  • IF Output: 950-1450 MHz
  • Output P1dB: +15 dBm typ.
  • Output IP3: +25 dBm typ.
  • Output VSWR: 1.7:1 max. @ 50 ohm
  • Output Connector: N-type 50Ω, SMA-type 50Ω, or F-type 75Ω

GENERAL

  • Dimensions:
    • 130 x 56 x 51 mm (F- & SMA-connector)
    • 135 x 56 x 51 mm (N-connector)
  • Weight:
    • 353 g WR112, 420 g CPR112G (F- & SMA-connector)
    • 369 g WR112, 446 g CPR112G (N-connector)
  • Temperature Range: Storage and operating: -40 to +80ºC, -40 to +176° F
  • Miscellaneous: Enclosed conductive O-ring, mounting screws (M4 x 10) 4 pcs

OPTIONS

  • Separate SMA Connector: for DC input or Ext. 10 MHz reference
  • Customized Gain
  • CPR 112 G Flange Adaptor
  • Extended IF
  • Fiberoptical Output

منتجات ذات صلة