Product Specification
- One-piece thermoset-molded offset reflector: This suggests that the reflector is made from a single piece of thermoset-molded material. Thermoset refers to a type of plastic that, once set, cannot be melted or reshaped. The “offset” design indicates that the reflector is not a standard symmetrical shape but is positioned or shaped in a way that serves a specific purpose, often related to optimizing light distribution.
- Plated hardware for maximum corrosion resistance: The hardware, which includes nuts, bolts, screws, etc., is plated with a corrosion-resistant material. Plating helps protect the metal from corrosion caused by exposure to elements such as moisture, air, or chemicals.
- Pre-galvanized construction: This indicates that the construction material, likely steel, has been galvanized before the final product is manufactured. Galvanization involves coating the steel with a layer of zinc to protect it from corrosion.
- 500-hour salt spray hardware: The hardware has undergone a salt spray test for 500 hours. This test is a common method to evaluate the corrosion resistance of materials and surface coatings. It simulates the corrosive effects that can occur in a salt-laden environment, such as coastal areas.
Antenna Mechanical and Environmental Specifications
Specifications | Details |
---|---|
Reflector Material | Glass Fiber Reinforced Polyester |
Antenna Optics | One-Piece Offset Feed Prime Focus |
Mount Type | Elevation over Azimuth |
Maximum Radio Weight | 3.6 kg or 8 lb for RF Electronics |
Elevation Adjustment Range | 10° – 90° Continuous Fine Adjustment |
Azimuth Adjustment Range | 360° Continuous, ±10° Fine |
Mast Pipe Interface | 114 mm (4.50 in) Diameter or 101 mm (4.00 in) Diameter |
Wind Loading | Operational: 80 km/h (50 mph) |
Survival: 200 km/h (125 mph) | |
Temperature | -50°C to 80°C |
Humidity | 0 to 100% (Condensing) |
Atmosphere | Standard Hardware Meets 500 Hour Salt Spray Test Requirements (ASTM B-117) |
Solar Radiation | 360 BTU/h/ft2 |
Shock and Vibration | As Encountered During Shipping and Handlin |
C-Band & Ku-Band Antenna Specifications
Specifications | C-Band | Ku-Band |
---|---|---|
Effective Aperture | 1.8m (71 in) | 1.8m (71 in) |
Operating Frequency | Tx: 5.850 – 6.725 GHz | Tx: 13.75 – 14.50 GHz |
Rx: 3.400 – 4.200 GHz | Rx: 10.70 – 12.75 GHz | |
Polarization | Linear, Orthogonal | Linear, Orthogonal |
Gain (±0.2 dBi) | Tx: 39.3 dBi @ 6.1 GHz | Tx: 46.8 dBi @ 14.3 GHz |
Rx: 35.4 dBi @ 3.9 GHz | Rx: 45.3 dBi @ 12.0 GHz | |
3dB Beamwidth | Tx: 2.0° @ 6.1 GHz | Tx: 0.8° @ 14.3 GHz |
Rx: 3.0° @ 3.9 GHz | Rx: 1.0° @ 12.0 GHz | |
Sidelobe Envelope (Tx, Co-Pol dBi) | Mainbeam < Θ < 20°: 29 – 25 Log Θ | Mainbeam < Θ < 20°: 29 – 25 Log Θ |
20° < Θ 26.3°: -3.5 | 20° < Θ 26.3°: -3.5 | |
26.3° < Θ < 48°: 32-25 Log Θ | 26.3° < Θ < 48°: 32-25 Log Θ | |
48° < Θ < 180°: -10 | 48° < Θ < 180°: -10 | |
Antenna Cross-Polarization | 30 dB on Axis | 30 dB on Axis |
Antenna Noise Temperature | 30° El: 33°K | 30° El: 23°K |
VSWR | Tx: 1.3:1 | Tx: 1.3:1 |
Rx: 1.4:1 | Rx: 1.5:1 | |
Isolation (Port to Port) | Tx: 60 dB | Tx: 80 dB |
Rx: 60 dB | Rx: 35 dB | |
Feed Interface | Tx: CPR-137 or Type N | Tx: WR75 Flat Flange |
Rx: CPR-229 | Rx: WR75 Flat Flange |
1.8m RxTx Class II Type 182 VSAT Antenna supplier, 1.8m Class II Type 182 VSAT Antenna supplier, 1.8m Class II VSAT Antenna supplier, 1.8m Ku band Class II VSAT Antenna supplier, 1.8m C Band Class II VSAT Antenna supplier, 1.8m VSAT Antenna Type 182 supplier, 1.8m RxTx Class II Type 182 VSAT Antenna price, 1.8m Class II Type 182 VSAT Antenna price, 1.8m Class II VSAT Antenna price, 1.8m Ku band Class II VSAT Antenna price, 1.8m C Band Class II VSAT Antenna price, 1.8m VSAT Antenna Type 182 price, 1.8m RxTx Class II Type 182 VSAT Antenna for sale, 1.8m Class II Type 182 VSAT Antenna for sale, 1.8m Class II VSAT Antenna for sale, 1.8m Ku band Class II VSAT Antenna for sale, 1.8m C Band Class II VSAT Antenna for sale, 1.8m VSAT Antenna Type 182 for sale.