iDirect X3 Satellite Modem

The Evolution X3 stands as a pinnacle in the realm of technology, implementing the DVB-S2 standard with Adaptive Coding and Modulation. Its outbound carrier, harmonized with iDirect’s sophisticated TDMA or SCPC Return channel, optimizes satellite capacity, ushering in a new era of star topology networking.

Beyond its aesthetic appeal, the Evolution X3 is a formidable performer. Tailored for diverse broadband needs such as Internet and VPN access to enterprise networks, as well as real-time VoIP and videoconferencing, it guarantees a superior Quality of Service. iDirect’s Group QoS dynamically prioritizes traffic across multiple sites and user sub-networks, ensuring optimal performance.

Seamless integration into data networks is a hallmark of the Evolution X3. With an integrated satellite modem and router featuring an Ethernet interface, it effortlessly assimilates into diverse data networks. Support for a comprehensive set of IP protocols and features, including TCP, UDP, multicasting, NAT, and DHCP, ensures compatibility with an extensive range of applications.

Flexibility takes center stage, as the Evolution X3 offers over-the-air software licensing features. Operators can enhance data security or extend remote capabilities, tailoring the system to meet specific technical and budgetary requirements.

Simplicity in network management is a key advantage. The Evolution router, easily configured, monitored, and controlled through the iVantage™ network management system, provides a centralized suite of software-based tools for overseeing satellite networks with efficiency and precision.

The Evolution X3 represents a paradigm shift in high-speed, high-efficiency IP broadband connectivity for enterprise networks. For those intrigued by this technological journey, we encourage you to engage with our content by liking, sharing, and subscribing. Until our next exploration, may you remain connected, informed, and at the forefront of technological advancements.

 

NETWORK CONFIGURATION:

Network Topology:

• Star (DVB-S2/ACM Outbound + Multi Frequency D-TDMA or SCPC Return*)

Downstream:

• Modulation: QPSK, 8PSK, 16APSK
• FEC: LDPC, 1/4 – 8/9
• Max. Symbol Rate: 45 Msps
• Max. Info Rate: 150 Mbps
• Max. Line Card IP Data Rate: 149 Mbps
• Max. Remote IP Data Rate: 29 Mbps

Upstream (TDMA):

• Modulation: BPSK, QPSK, 8PSK
• FEC: TPC, 0.431 – 0.793**; 2D 16-State, 1/2 – 6/7; 2D 16-State, 1/3 – 6/7
• Max. Symbol Rate: 7.5 Msps
• Max. Info Rate: 12.8 Mbps
• Max. Line Card IP Data Rate: 11.1 Mbps
• Max. Remote IP Data Rate: 7.8 Mbps

Upstream (SCPC Return):

• Modulation: BPSK, QPSK, 8PSK
• FEC: 16APSK 8/9 FEC, QPSK 6/7 FEC, QPSK 4/5 FEC
• Max. Symbol Rate: 15 Msps
• Max. Info Rate: 24 Mbps
• Max. Line Card IP Data Rate: 18.2 Mbps
• Max. Remote IP Data Rate: 11.8 Mbps

Note:

• Maximum downstream and upstream data rates cannot be achieved simultaneously.
• Maximum rates are achieved with optimal configurations.

 

INTERFACES:

Satcom Interfaces:

• TxIF (Transmit Interface): Type-F, 950–1700MHz, +7dBm / -35dBm
• RxIF (Receive Interface): Type-F, 950–2150MHz, -5dBm (max) composite / -125+10*log(Fsym)dBm (min) single carrier
• Software controllable 10 MHz reference on TX Out and RX In ports

BUC (Block Upconverter) IFL Interface:

• +24V, max. 70W, (120W PSU)
• Refer to X3 Installation Manual for a full list of supported BUCs

LNB (Low Noise Block) IFL Interface:

• +19V (Nominal), 500mA max
• DiSEqC (Voltage 14V/19V + 22KHz tone)

Data Interfaces:

• LAN (Local Area Network): 10/100 Ethernet, 802.1q VLAN
• RS-232: RJ45 (Console connection)

Protocols Supported:

• TCP, UDP, ACL, ICMP, IGMP, RIP Ver2, Static Routes, NAT, DHCP, DHCP Helper, Local DNS Caching, cRTP, and GRE

Security:

• AES Link Encryption (256-bit) (optional)

Traffic Engineering:

• Group QoS, QoS (Priority Queuing and CBWFQ), Strict Priority Queuing, Application-Based QoS, Minimum CIR, CIR (Static and Dynamic), Rate Limiting

Other Features:

• Built-in Automatic Uplink Power, Frequency, and Timing Control
• Authentication
• Antenna Control Interface (OpenAMIP)

 

Mechanical/Environmental:

• Size:
  • Width: 11.5 in (29.2 cm)
  • Depth: 9.9 in (25.1 cm)
  • Height: 2 in (5.1 cm)
• Weight:
  • 4.3 lbs (1.95 Kg)
• Operating Temperature:
  • 0˚ to +50˚C (32˚ to +122˚F) at Sea Level with a temperature gradient of 0.5˚C per 1 min
  • 0˚ to +45˚C (32˚ to +113˚F) at 10,000 Feet with a temperature gradient of 0.5˚C per 1 min
  • For ODU power consumption <70W (refer to X3 Installation Manual for details)
• Humidity:
  • Maximum 90% non-condensing humidity
• Input Voltage:
  • 100–240 VAC Single Phase, 50–60 Hz, 2A max at 90 VAC, 1A max at 240 VAC
• Radio Standards:
  • EN 301-428 v1.3.1 — Ku-Band System Level Specification
  • EN 301-443 v1.3.1 — C-Band System Level Specification
• Safety Standards:
  • Complies with IEC 60950, EN 60950-1, UL 60950-1, CSA C22.2 No.60950-1-03
• Emission Standard:
  • Complies with EN 55022 Class B, FCC Part 15 Class B, CISPR 22 Class B, EN 61000-3-2, EN 61000-3-3
• EMC/Immunity Standard:
  • Complies with EN 55024, EN 301-489-1, EN 301-489-12, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11
• Certification:
  • FCC, CE, and RoHS Compliant

*Available with iDX 3.0 or above. **Not supported for use with DVB-S2 outbound in iDX 3.0 or above.

X3 Satellite modem in Dubai, X3 modem in Dubai, iDirect X3 modem in Dubai, X3 Satellite modem supplier, X3 modem supplier, iDirect X3 modem supplier, X3 Satellite modem price, X3 modem price, iDirect X3 modem price, X3 Satellite modem for sale, X3 modem for sale, iDirect X3 modem for sale.